Matt Hardener Used For Epoxy, Hybrid, Urethane, Polyester, TGIC-polyester Powder Coating System

Introduction:

Powder coating is a dry finishing process where finely ground particles of pigment and resin are electrostatically charged and sprayed onto a grounded part. The part is then baked in a curing oven, at which time, the powder melts, bonds and cures – leaving an attractive, uniform, high-quality and durable finish. Prior to coating, parts are pre-treated to ensure optimal surface preparation and paint adhesion.
We offer the highest quality powder paint produced by the industries most recognized powder manufacturers.
Epoxy, hybrid, urethane, polyester, TGIC-polyester, various textures and metallics are all available.


COLORS AVAILABLE

· RAL colors coating powder
· Pantone colors
· Color-matching is available

GENERAL TYPES

· Polyester /Hybrid powder coating color
· Epoxy Powder coating color
· Metallic powder coating color
· Hammer tone color powder coating
· Texture color powder coating powder
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, wood, multi-color.

PHYSICAL PROPERTIES

· Specific gravity : 1.2 ~ 1.8g/cm3 up to colors
· Particle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
· Level of liquidity: 24 ~ 27 mm
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating

Quanxu Technology Lead by a management team with more than 20 years of experience in the chemical industry, came into establishment in 1995 to serve the domestic and international markets for specialty chemicals. The company has independently researched, developed and manufactured several series products including Silica Matting Agent,Matt Hardener, Fumed Silica,Zinc Stearate and color inkjet photo paper coating etc.

COMPANY MOTTO

• Developing all range synthetic silica and it's derivatives
• Adhere to excellence in products and services
• Reliable to business partner
• International acceptable quality products
• Strategy: executing blue ocean strategy and go up to the next level.

VISION

• Quanxu Technology aim to become the leading raw material and technical solution provider to the chemical industry.

MISSION

• Provide contribution to both business and non-business environments:
• People: Be a workplace where people can innovate and expand their knowledge through daily work activities.
• Portfolio: Bringing the widest range of Synthetic Silica that China can offer.
• World: Collaborate with stakeholders to focus on green manufacturing processes to lessen environmental impacts.

Introduction

Our reputation as a key national supplier is built upon the foundation of quality and integrity. The company has independently researched, developed and manufactured several series products including Silica Matting Agent, Matt Hardener, Fumed Silica, Zinc Stearate and Alumina.

Our product development is guided by accurate market analysis. We have successively established R&D Centers of Matting Agent, Fumed Silica, Zinc Stearate, Matt Hardener, and Alumina.Application Research centers were also created for mediums such as paints, ink, textiles, leathers and new energy materials. These Modern facilities form the very core of our development system and are staffed by a professional taskforce of technical personnel. Their contributions have yielded environmental-friendly products such as the low oil absorption UV matting agent, a compound that was specifically designed to minimize the VOC emission of paints. These Products are the building blocks of eco-friendly alternative engry solutions. Their ability to protect leather and prevent the corrosion of metals make them idea for floor coating, glass paint, and the making of woodenware.

Quanxu Technology firmly believes that technological advancement is the precursor for market performance. We have established major distribution centers in one overseas location and 3 domestic regions.

Product quality has always been at the very top of our priorities. Over the years, we have imported a number of advanced testing instuments enhanced quality control and inspection. Quanxu operates in strict adherence with all relevant safely standards. Our export products are approved by international recognized standards such as SGS and ROHS.

More than a decade of groundwork has allowed us to penetrate overseas markets in regions including Europe, the Middle East, South America, Southease Asia, Africa, Etc. We have established a long-term cooperative partnerships with international chemical mega-corporations such as Valspar and AKZONOBEL.

Through sustained growth and expansion, Quanxu Technology strives to become a world-leading supplier of chemical materials. With quality and integrity, we will create an enterprise that can withstand the test of time!!